Blog – Page 18 – Steve’s Hobby Blog

Fit to Paint.

I have noticed the number of times that I have moaned about not having enough time to do all the painting and modelling that I have lined up. It’s somewhat of a thread that runs through my blog. I guess that most in the hobby that have full time jobs and a family are under similar time pressures. Now that I have clocked up my ‘three score years’ and have started to move into the ‘ten’, time seems to be just a bit more precious than the carefree days of youth. The other factor, of course, is health. I am fortunate enough to enjoy generally good health and apart from the usual colds and coughs that go around and self induced indigestion, I fair pretty well. However, over the last couple over years I noticed that my BMI has moved from being healthily overweight into obese territory. Even with all of my scepticism for the ‘nanny’s of this world who insist that they know what’s best for us, I had to admit that something must be done.

Having given up on trying to grow taller, it seems that my only option to bring my BMI down is to lose some weight. Matters were brought into focus by the approach of the festive season and I noticed that I was already over my last Christmas peak weight. My excuse is that I missed out on a holiday this year, so didn’t bother with my usual attempt to get beach fit. In my case, this means losing just enough weight to avoid attracting the attention of Japanese whaling ships whilst out swimming or being dragged off the beach back into the water by green activists! It’s fair to say that I model myself on the guy in the Southern Comfort Ad, except, of course, for the moustache…

The up shot is that I have been spending some of my hobby time out walking in the evening. Just a couple of miles at a steady pace – my jogging days are long gone- and very gradually, the weight is coming off. At this rate, I will be back down to just being over weight and ready to take on the Turkey, Christmas pud and all that Christmas brings. I guess that if helps avoid Type 2 Diabetes and some of the other issues that come with carrying a bit extra, then I’m hopeful that the time spent exercising will buy a few more years in which I can finish my Napoloeonic Army…

Perry’s British Ammunition Wagon

Talking of which, as you can see from the above picture, I have now finished the Perry’s British Ammunition wagon. Once I had cleaned up the casting, painting it was relatively quick to do. The next job is of course to paint the horses and crew and of course base it, which I suspect will be a bit of a longer task. It doesn’t help that I am also distracted by the new releases from the Test of Honour range. The new Bandits and Brigands set is also on the work bench and I have just about finished the first model.

First Bandit on the work bench

I decided to copy the painted example on the Warlord web site, using predominantly Vallejo Buff to paint his clothes ( Kimono? Pyjamas?). Here he is all based up.

First Bandit based

As you can see from the work bench, the rest of his gang are now primed and ready to paint. And yes, that’s a DeeZee giraffe in the background also underway.

You’re having a giraffe!

What with DeeZee models, Test of Honour, Napoleonics, my Caribbean project and my Dark ages warbands, I guess that I need all the time that I can get. I’ll keep walking, I need to be fit to paint!

Remember, If you are looking for anything to help with your hobby, visit my shop:

ARCANE SCENERY AND MODELS

Most of the items that we sell are available post free to most worldwide locations at the time of writing.

Brontotherium!

It seems at the moment, I am easily distracted. I have been giving the DeeZee range a bit of an overhaul with a view to perhaps extending it in the New Year. Whilst going through the display models I noticed that the Brontotherium was looking a bit tired and that we didn’t even have a painted example on the web site so I thought that painting a new display model would be a nice little project.

For those that don’t know, a Brontotherium (‘thunder beast’) is an extinct genus of prehistoric odd-toed ungulate mammal of the family Brontotheriidae, an extinct group of rhinoceros-like browsers related to horses. The genus was found in North America during the Late Eocene. Many Brontotherium remains have been found in South Dakota and Nebraska. In the past, specimens exposed by severe rainstorms were found by Native Americans of the Sioux tribe. The Sioux believed these creatures produced thunderstorms when running over the clouds, and called them “thunder horses”. Many of the skeletons found by the Sioux belonged to herds which were killed by volcanic eruptions of the Rocky Mountains, which were volcanically active at the time.

DeeZee Brontotherium Basic paint job!

I decided to paint my Bronto in brown rather than as some references, that show them as grey. I had also decide to use a limited pallet of just three colours, Vallejo Light Brown 70929, Cork Brown 70843 and Iraqi sand 70819. I took the same approach as if I was painting a horse. Once cleaned up and primed with Army Painter Leather brown, I first used a large brush to roughly coat the Bronto with the light brown. To give a bit of definition, I then liberally applied a wash of Army Painter strong tone ink. When the ink was dry, it was just a case of using a large brush to dry brush a succession of coats using lighter shades of the three colours mentioned above. I picked the eyes out in Black and painted the hooves and tail in a dark black brown (70822). It was all done in about 30 minutes!

Brontotherium on base

The next job was to base Bronto. As usual, I attached the model to an MDF base using Vallejo Dark earth textured paste. I also set some rocks into the paste and pressed in some coarse sand for additional texture.

Base Detailed

I then painted the base using my favourite basing paint, Dulux ‘Dehli Bazzaar’. I have mentioned before that I think that it makes sense to use Emulsion paints for basing rather than the more expensive paints that we use to paint the actual models. I had actually got out of the habit and was going through Vallejo Chocolate brown bottles rather quickly until I remembered my own advice!

A tin of emulsion goes a long way!

I am happy to mix Vallejo paints with the emulsion but obviously in small quantities. I this case, I used Iraqi Sand to provide highlights and simply dry brushed over the base coat.

The next job was to detail the base by adding some grass. I wanted some long grass for the Brontotherium to be charging out off. Woodlands scenic make packs of long grass and this seemed ideal.

Field Grass from Woodlands Scenics – Natural Straw.

It was the first time that I had used this type of grass but it worked very well. There is a surprising amount of material in the packet and a little goes a long way! I Just took small clumps, cut them to size and then fixed them to the base using a hot glue gun. PVA would have worked but would have taken longer to dry. I have since found this video from the terrain tutor on you tube which shows an alternative method of producing long grass clumps – I’ve tried it and it works well! I now have a batch ready for another project:

I also used some Woodland Scenics yellow coarse foliage to hide any glue around the base of the long grass and added some Beige coloured Gamers grass tufts.

Brontotherium on finished base

The whole project was surprisingly quick and simple to complete and I now have a new display model for my DeeZee range. If you would like to see the rest of the range, the links, as usual are to be found below the final photo.

Most of the products used in my Blog ( except the Dulux paint!) are available post free to most worldwide locations ( at the time of writing) and can be found here:

DEEZEE MINIATURES

VALLEJO PAINTS AND TEXTURES

WOODLAND SCENICS

MDF BASES

Shine a light!

I continue to bit and bob between one project and another. The problem is there are just too many great games and figures out there! Test of Honour, being a case in point. It’s got an addictive quality to it that keeps pulling me back into it’s world. Before it’s release I had no intention of ever building a Samurai or Japanese army. I now find that I have an increasing collection of both figures and scenery. If I’m not expanding my scenery collection, I’m looking at the next set of miniatures to paint. All of this when I am supposed to be finishing my Napoleonic project…

The latest set from Warlord – just too tempting…

The latest release to catch my attention was the Bandits and Brigands set, the first set that is all new metal models from Warlord. I had intended to get some Samurai Cavalry but the figures in the Bandits set are just superb – possibly the best release of the year! No doubt once I get into painting these, I’ll complete a proper review of the box set but for the time being, lets just say that that I am smitten!

The scenario book that comes with the set includes some night fighting scenarios and the possibility of adding Lanterns to my playing board. Of course, Sarissa make a really nice set of lanterns so I decided to start here. It seemed a shame not to install lights in the lanterns but I was looking for a simple solution. That solution was found at my Granddaughters Halloween party – flickering battery operated tea lanterns! So here’s my progress so far.

Sarissa Lantern Set

The Sarrisa Lantern set includes four lantern that are very straight forward to put together – regardless, I still suggest that you follow the instruction sheet as it will ensure you don’t make any mistakes!

Hole cut into MDF base

The only modification that I needed to make was to cut a hole throught the MDF lantern base as shown. MDF is a fairly soft material, so once I had drilled a pilot hole using a simple hand drill, I used a sharp knife to carve the hole to the size required.

LED Tealights – batteries included

I grabbed a couple of packs of tea lights from the local BM bargain store. The plain ones were just 99p – the posh Halloween ones, twice the price at £1.99 – still a bargain! As it turned out, the cheap ones were the best. My first attempt involved removing the outside of the tea light to see if I could incorprate it into the lantern base.

First attempt – base of tea light removed.

It worked OK but I would have needed to built a new cover around the base and the on/off switch wasn’t quite as easy to use. Whilst fiddling around with the cheaper lights, I found that they actually looked good without the modification. They were a perfect fit. I didn’t even have to glue the Lantern to the tea lights – they simply just sat on the top. I guess you could glue them but I now have the option of using them with or without the lights.

Tea lights added intact!

Although they are standing a bit taller than I first wanted, I thought that the effect was OK and certainly saved time. To cover the tea lights and blend them in, I simply sprayed the whole assembly using a textured spray from B&Q. The MDF takes the spray well as do the tea lights and the result is a stone effect. Just remember to use a piece of masking tape to cover the light bulb when spraying!

Lanterns sprayed with texture spray.

Just to finish things off, I decided lightly dry brush the lanterns with Vallejo Iraqi Sand 70819 and then to add some ‘moss’. This was simply woodlands scenic green scatter stuck on using a watered down PVA glue mix.

Lanterns with moss added!

As you can see from the final pictures I added a bit more moss for effect. I think that these make a nice addition to my scenery box and I will get on and finish the other two lanterns although I might just be tempted to see if I can make the lower profile versions without too much extra effort!

Lanterns on the gaming table

Close up of Lanterns

As usual the links to most of the products used are below – you will have to search out your own tealights & textured spray but a trip to B&M bargains will help! At the time of writing, all products are POST FREE to most worldwide locations.

You can see our range of Test of Honour products and Samurai scenery and accessories here:

SAMURAI

Happy modelling!

Sloop ahoy!

I’ve continued work on my sloop and have surprised myself by nearly finishing it. In fact, it’s got to the stage where I have to remind myself that I am building a piece for the wargames table and not a display model. The thing is that the model is so nice that it is tempting to go overboard ( pun intended) and really detail it – the problem being that it would then be impractical to use because of the rigging and the sails. Regardless, the masts are now in place – I went for a straight forward varnished finish – they will darken over time anyway – and the tiller/rudder is done. I am still working on a name for her – I wont consult the internet for answers, Boaty Mc Boat Face is already taken….

Sloop all rigged and ready for action.

There are a few additions that I will make. For a start, she needs guns and I have four cannon that I am painting. I should have finished them last night but I was distracted by the football on the radio – Tottenham beating Real Madrid 3-1 was too exciting to let me focus on the painting! I’m nearly there though.

Cannon on the painting mat.

The guns are made by Amati and supplied by Expo – we do carry them in our shop and the link is below. I think that they might be a bit on the large size for the Sloop but they look superb and should deter pirates! I decided to paint the gun carriages to match the ships hull, with any metal parts painted black.

The crew!

Just for fun, I’m also going to add a couple of permanent crew figures, a ships cat and a powder monkey! The cat is from the DeeZee small dogs pack and the monkey from North star, although I don’t think that he is now available. Again, there is still some more work to do to finish these off. The only other additions planned are an anchor and a lantern for the mast. When it comes to the crew, I do have a few Sailors and Marines that I can use as you can see from the picture. It might be nice though, to add a new crew that have bases that either match the deck of the Sloop or are clear. I am also tempted by the Footsore figure, John Finch…

Sloop with crew

Close up of the Crew

You can also see from the pictures that the three pieces of scatter scenery for the Caribbean are now complete so I better get writing those rules! As well as the sloop I have also been playing around with some Japanese lanterns for my Test of Honour set up. These are also nearly complete – I’ll put the results up in next weeks blog!

As usual, here are the links to the items used in this weeks blog. The ship is from Games of War and only available direct from their web store:

GAMES OF WAR

The cannon are available here:

SHIPS CANNON AND FITTINGS

Palm trees are here:

PALM TREES AND JUNGLE PLANTS

The cat is available as part of the DeeZee Range:

DEEZEE RANGE

and you can see John Finch here!

JOHN FINCH

At the time of writing, the items are available post free to most worldwide locations.

Whats on the workbench?

You can tell that I am struggling to get anything finished by the title of this weeks blog. It’s been one of those busy fortnights where my painting and modelling has had to take a back seat to the other things in life. Mind you I did manage a Black powder game last Thursday, during which I was comprehensively thrashed by my opponent, Mr Grant. I wished that I had taken pictures of the game just to remind me of how one over confident move can end in disaster.

Cavalry charge!

I had charged a regiment of Cuirassiers with two regiments (a brigade) of British household cavalry. The combat went very badly and both of the British regiments were pushed back leaving the Cuirassiers nicely positioned behind a brigade of three battalions of my British infantry within initiative charge move… The brigade was wiped out as they lost the one sided combat and then failed their morale tests. ‘Game over, man’ as Hicks or Hudson would have said! In future, if I have a cavalry regiment positioned to protect a flank, maybe I’ll think twice before committing it to an attack and leaving the flank so exposed!

Perry’s Ammunition Wagon

So back to the work bench. I had started work on a Perry’s British ammunition wagon. As usual, the sculpting, poses and detail on the model is superb and everything that you would expect from the Perry’s. However, the casting quality was not so good. I expect to do some cleaning up when starting a model but the amount required on this piece was considerable. In fact, after two evenings scraping and filing, the model is still not ready for priming. The annoying thing is that in cleaning up the casting, I have inevitably spoilt some of the lovely detail – the wheels and horses were particularly poor. The up shot was that I have put the wagon aside and started another model. I will get back to it when I’m in the mood for some more filing….

My next project - a small loop fpr naval engagements.

My next project – a small loop for naval engagements.

No such problems with the resin ship that I purchased from the last Partizan show. I have managed to loose the name of the company from whom I bought the model – I will find it and include it in a future blog or edit this one. The model is worth recommending! Once I had washed the model down using soap & water, I primed it with Army painter brown as you can see.

Sloop ahoy!

The next task was to paint her. I used Vallejo paints; Mahogany Brown 70846 for the interior woodwork, 310 Old wood for the deck, Biege 70917 for the upper hull, Off white 70820 for the lower hull and Black 70950 for the trim etc. I gave the interior, including the deck, a wash with army painter dark tone and then dry brushed the deck only with 310 old wood and then a further coat of 50/50 old wood 310/Iraqi Sand. The grating was painted in Chocolate brown and washed in Dark tone. I painted the stern panel in 70961 Sky Blue with Brass trim.

Stern of the Sloop

As you can see, I’ve also painted one of the cannon that will arm her. The cannon is from Arcane Scenery – the link is below. There is still quite a bit of work to do before she is ready for the table. Obviously, the mast, bow sprit and rigging will all need completion but I think that she will make a nice addition to my Caribbean collection. Incidentally, I haven’t got too hung up on how accurate the colours are. Although the sloop (?) will be crewed by the Royal Navy, it seems that even when it comes to such an iconic ship as HMS Victory, there is some controversy as to the actual colour:

RESTORED VICTORY CAUSES CONTORVERSY

So I am not going to be too precious regarding the colour scheme of a fictional boat designed to go on a wargames table! The other dilemma that I have is what to name her – I think I will resist indulging my sense of humour and perhaps steal a name from an Alexander Kent or Patrick O’Brien novel…

The view from the stern

So, the next job will be to fit her out – hopefully, I’ll make a bit more progress now that the clocks are about to go back.

More Jungle Scenery

In between painting the Sloop, I’ve been making three more pieces of scatter scenery for the table using a slightly different variety of palm tree. They are waiting for a coat of paint and some scatter but are nearly complete. If you missed how I make these, check out last weeks blog ‘ Desert Island Discs’. Although you can never really have too much of this sort of thing, I think that this will do me for the time being. I have plans to make some area bases to incorporate these pieces. If it works, I’ll include this in a further blog.

That’s it for now, here’s the usual links. Remember, if you are buying from Arcane Scenery, at the time of writing, postage is free to most worldwide locations!

SHIPS CANNON AND FITTINGS

VALLEJO PAINT & TEXTURES RANGE

PALM TREES AND JUNGLE PLANTS

STOP PRESS! I’ve just remembered the supplier of my boat. the Web site is Games Of War, you can see their excellent range of boats here:

GAMES OF WAR

Desert Island Discs

The Caribbean project is still progressing but for a change, I decided to make some scenery. It should make the games more interesting – it’s always nice to add a bit of local flavour. It also makes sense as I am now well into writing my rules set for the Caribbean and a bit of scenery will make play testing more fun.

The obvious choice was to make some scenery with palms trees. It’s a nice straight forward project and requires the minimum of material. For the bases, I used an idea stolen from one of my gaming colleagues and recycled a couple of old DVD’s that I had kicking around. I simply covered them in a layer of Milliput and pressed in the palm trees – Arcane Scenery, of course! To add a bit of extra interest, I placed a few rocks and some smaller jungle plants into the milliput and then let it dry.

Jungle scenery on the work bench

Close up of Scenery in progress

There’s no need to cover all of the disc with milliput, just enough to give some height and to secure the trees. I let the milliput dry over night.

The next stage was simply to cover the base in Vallejo dark earth texture paste. I really like this stuff and use it on most of my basing. It’s quite robust when dry and because it seems to retain some flexilibity, it doesn’t crack or flake in the same way that say, Plaster of Paris or Polyfiller does. I just used a light skim and it doesn’t matter too much if you get it on the trees or rocks. It wipes off easily whilst still wet.

Vallejo texture paste added

Once again, this was left to dry overnight. The next stage was to paint the bases. I have been using Vallejo paint for this job but remembered that in the past I had been using a Matt emulsion to paint my scenery. Sure enough, I still had the tin on the shelf, so the bases were painted in ‘Delhi Bazaar’! Using matt emulsion is a much cheaper way of painting war games scenery than using your best Vallejo paint. Keep an eye out for match pots at your local DIY shop. The irony is that they are more likely to be selling off the darker brown colours cheaply, as whilst these are ideal for wargames scenery, they don’t look so good on your living room wall…

There’s no problem in mixing emulsion with Vallejo though. I used a mix of emulsion and Iraqi Sand to dry brush the bases and bring out the detail – you do not need very much paint for the dry brushing stage.

Bases dry brushed.

I also repainted the rocks. I often leave them in their natural state but decided to give them a coat of paint to bring out the detail. It is a simple matter to paint them dark grey and then dry brush them in lighter shades. You can also see my latest batch of Rebels that are nearly ready for the table. The nice thing about these scenery projects is that you can get on with other stuff whilst each stage is drying.

Woodland Scenics Scatter added to the bases.

Once the paint was dry, I brushed on some PVA glue and added some Woodland scenic green scatter and a few tufts of grass. I kept the grass tufts to a minimum. Although a bit more vegetation would be more realistic, I wanted space on the bases for my figures when playing!

Jungle scenery ready for the table.

So that’s the first of my scenery done. I will add a few more of these to my scenery collection, using some of the different type of palms and trees that we have. I think that using CD’s/DVD’s is quite a good way of basing your scatter scenery, so long as you are not ruining your favourite film or TV boxed set! The effect can be perhaps a bit uniform but placing two or three together makes this less obvious. I also intend to make a few textured bases in MDF so that I can create ‘area scenery’ for the table – more on this in a later blog, perhaps.

If you would like to make some similar scenery, you will have to supply your own DVD’s but we do have most of the other items used and at the time of writing, send out post free to most worldwide locations.

Here are the links:

PALM TREES

MILLIPUT

VALLEJO TEXTURES

WOODLAND SCENICS SCATTER

PVA GLUE

TRENT MINIATURES CARIBBEAN RANGE

Cuban War Dogs

My Caribbean project continues with the addition of a set of Cuban Chasseurs with dogs to my collection. These troops, or more accurately mercenaries, were brought across from Cuba by the various combatants in the Caribbean to fight against the rebellions and revolts taking place. The British imported these mercenaries specifically to suppress the Maroon rebellion on Jamaica but I understand that they were also used on Haiti. My references have come from an account in an book by Robert Charles Dallas written in 1803, ‘The History of the Maroons’ that I found online. As well as describing the Cuban Chasseurs, he gives an account of the brutal training regime inflicted on the dogs and how they were used.

Reference: The History of the Maroons.

In 1795 the second Maroon rebellion took place and despite being faced by some 5000 British soldiers and militia, the Maroons held their own and fierce guerrilla warfare led to a stalemate. It is claimed that the introduction of the Cuban Chasseurs and their dogs broke this stalemate and ended the rebellion.

Chasseur and Cuba Bloodhounds

The dogs have been described variously as a cross between Lurchers and Bloodhounds, although it is possible that they were a variety of Great Dane. It could just be that the breed itself wasn’t consistent but it was the training by the Cubans that made the dogs so effective. To paraphrase from the book, ‘These people live with their dogs, from which they are inseperable. At home, the dogs are kept chained and are never unmuzzled but for attack…..The Chasseurs beat their dogs most unmercifully, using the flat side of their machetes. As a result the dogs coat is much harder as is the structure of the dog…’

In the book, there is an account of how during the voyage from Cuba the dogs got loose and tore apart the cattle that were also on board. On page 129, there is also an account of how the dogs were demonstrated to a commander in Jamaica to see how they would react under fire. The dogs were loosed on a small body of troops and despite a volley of musket fire being discharged (presumably blanks) the dogs charged home into the ranks of the soldiers, seizing the muskets in their jaws and causing the commander to run for his carriage to escape, before the handlers brought the dogs under control.

My understanding is that such dogs were used by the Spanish and French troops as well as the British and the Cuban Chasseurs that trained them were held in high regard. They were most effective at fighting against irregular troops in rough ground and helped to avoid ambush.

Trent Miniatures sell a pack of these ‘troops’ so I wanted to add some of them to my collection.

Trent miniatures Cuban Chasseurs

The pack includes two Dog handlers, or Chasseurs and four dogs. As you can see, I’ve cleaned them up and primed them in Army painter Leather brown. Painting was a straight forward task. It is said that the Cubans favoured a red checked shirt, so I have finished one accordingly. Using the picture from the Robert Dallas book as a reference, the other Chasseur is more plainly attired. Similarly, I have gone for a simple finish for the dogs, with one white, one light/orange brown and two Dark Brown.

Painted Chasseurs & dogs

The figures are based using a special ‘sabot’ style tray to enable the dogs to be unleashed during wargaming.

Unleash the dogs!

These bases are not yet available through my shop but if there is sufficient interest, I can have more cut. I finished the bases in my usual style with the Vallejo dark earth texture, woodland scenic scatter and Gamers grass tufts.

I have already used the dogs as a unit in wargaming as I am in the process of developing a set of rules for the Caribbean conflict. We conducted the first play test last week and although much was learnt, there is a long way to go before the rules will be ready.

If you would like to purchase the Cuban Chasseurs and their dogs you can do so by clicking here:

CUBAN CHASSEURS CAR09

Vallejo paints and textures can be found here:

VALLEJO PAINTS

Woodland Scenics Scatter here:

WOODLAND SCENICS

and Gamers grass here:

GAMERS GRASS

All are available post free at the time of writing.

Napoleonic War in the Caribbean

The war in the Caribbean is project of mine that has been rumbling along in the back ground for some time and I think that I am now in the mood to move it forwards. I have been painting bits and pieces for this theatre for some time but it’s been a bit of a solo project and has taken a back seat to my other interests.

I decided that I would first paint all the variants of the Trent Miniatures Caribbean Slave packs. They are sold as random mixes but I managed to persuade Duncan to let me have one of each type. First we had to identify them!

Revolting Slaves – with firearms.

Revolting slaves with hand weapons

There are actually 30 variants. Although the pictures show 31 figures, there is a duplicate hidden in there! I already had painted a couple of packs of the revolting slaves and also a pack of Maroons but the idea was to build a decent sized warband of these guys to represent the small detachment of men led by Jean Kina in Haiti. Jean Kina was originally a slave but now freed, who came to command a force of up to 300 men (depending on the references that you consult) and fought for the British on Haiti.

This leads me perhaps to explain some of my fascination with the Caribbean in this period. The period of interest spans from 1793 to 1815 and during this time, there was a constant conflict running across the whole of the Caribbean area, including some parts of South America. The nations involved included the usual suspects of Britain, France, Spain and significantly, the Slaves and local population but the nature of the conflict and climate meant that many disparate troops types were sent out to fight on the islands.

I suspect that the lack of huge set piece battles has meant that the war has not been well documented despite the fact that the stakes were so high. Britain, France and Spain, gained an incredible economic benefit from the area and these Islands were crucial to these countries ability to finance their wars elsewhere. To be clear, most of my little knowledge comes from reading just one book, ‘Death before Glory’ by Martin Howard and some web articles. However, this has been enough to whet my appetite and I am rapidly learning as much as I can whilst continuing to build my forces.

Block painted Caribbean fighters.

As you can see from the picture above, once cleaned up, the figures were temporarily based, primed with Army Painter Leather brown and then painted in an assortment of pale colours to represent the sort of clothing worn in the Caribbean. I used the Vallejo Black brown to paint the flesh and highlighted with chocolate brown.

Caribbean Fighters based

I had decided to used Army Painter Quick shade Dark Tone to speed up painting and then rehighlighted were appropriate. The basing was my usual Vallejo Dark earth Texture paste but I added some gravel and small stones for additional texture.

Close up of basing

The bases were finished by painting first with Chocolate Brown, then a Chocolate Brown/Iraqi Sand mix, finishing with a light dry brush of Iraqi Sand. Finally, I added some green scatter and some grass tufts and they are ready for the table.

Jean Kina’s Fighters are ready for battle!

There’s plenty more in the pipeline! As well the land operations there was plenty of action at sea, so I will have a use for my growing naval detachment.

My next project – a small sloop for naval engagements.

If you would like to read more on my Caribbean project and the figures that I have painted, click here:

CARIBBEAN BLOG POSTS

The Trent Miniatures Caribbean range is available here:

TRENT MINIATURES CARIBBEAN RANGE

The Vallejo range can be seen here:

VALLEJO PAINTS AND TEXTURES

All Square – part two

Earlier this year, fellow gamer and modeller Chris Kirk showed how he intended to build an infantry square to use as a marker when playing Black Powder. You can see the first blog article here where Chris explained how he would convert the models:

ALL SQUARE – PART ONE

The model is now finished and as you can see, it looks very nice indeed!

British Infantry Square

Chris decided to paint the figures as 27th Regiment, the Inniskillings. The 27th is famous for the stand that they made at Waterloo. Towards the end of the battle, they had moved up to take position just to the left of the crossroads, some 200 hundred yards behind La Haye Sainte which had by now fallen to the attacking French. They were ordered by Sir James Kempt not to abandon their position and to hold at all costs as their presence would stop the French infantry from further penetration of the British centre.

The 27th stand

This left them terribly exposed to both the French tirailleurs who had taken position on the small knoll to the side of La Haye Sainte and from the French artillery that had moved up in support. The casualty rate for the 27th was horrendous. Without moving a step the regiment lost over two thirds of it’s men, the highest casualty rate for any British Battalion that fought at Waterloo. The Battalion was commanded at the Battle by a Captain, John Hare. There were 19 officers in total, of which sixteen were killed or wounded. Of the total of 747 men in the battalion, 493 were killed or wounded in a matter of hours and yet still they stood in position, holding the line.

The Square – close up!

The lady in the model represent one of the remarkable stories of Waterloo. In the midst of the carnage unfolding in the square was a soldiers wife, who though pregnant, had refused to go to the rear and stayed with her husband. She busied herself attending to the wounded until she herself was struck in the leg by a shell splinter. Her poor husband faired even worse, losing both of his arms.

The Square holds firm

The model, as well as being a practical gaming piece will serve as a small reminder of the bravery of the 27th. The idea of such a model is that it will be used on the table and not just appear in a glass cabinet. Chris and I had quite a discussion about such ‘practical dioramas’ that allow the gamer to stray beyond just churning out regiments to fill the battlefield. The square marker is just one of these ideas – others will follow!

Safely in the Cabinet

Victorious Miniatures

The launch of a new range of miniatures is always an exciting prospect. However, it’s not quite so easy as it looks and many start ups fall by the wayside once the initial enthusiasm has passed. I hope that this is not the case for the latest range that we are happy to support! Victorious Miniatures is a venture undertaken by long term wargamer and enthusiast, Keith Tait. I have often had the pleasure of facing his armies across a wargames table, so I was intrigued when he told me of his plans to launch his own range of figures.

NAPBR15 Duke of York

My first reaction and words of encouragement were ‘are you mad..?’ I reminded him of the well known quote, oft repeated in the industry ‘how do you make a small fortune in the model soldier business? – Start off with a big one…’ Keith was undeterred. His project was to be a labour of love and he was planning to build a range of figures that he had always wanted. The commercial side was only important in as much as he hoped that the range would eventually become self financing and grow accordingly. And so Victorious Miniatures was born.

NAPBR16 Sir Ralph Abercrombie

The initial ranges have been sculpted by the very talented Mark Simms and focus on the British Army circa 1793 – 1795 in the Flanders Campaign. The figures are compatible with Perry, Warlord and Victrix miniatures. Even better, they compliment the Trent Miniatures range, who cover a similar period and are great favourites of mine.

NAPBR01 Round hat command

The two main commanders have been sculpted, the Duke of York, who led the expedition, and one of the Generals, Sir Ralph Abercrombie ( also spelt as Abercromby). The Line infantry is represented by four packs: a command pack, Centre Company Infantry marching; Flank Company Infantry Marching and Skirmishing Infantry. These infantry are all wearing the round hats and long tailed frock coats of the time. In addition to the standard line troops, there are also some very nice Highlanders. Before you reach for the tin of tartan paint, fear not! The Highlanders in the Flanders Campaign were wearing standard issue trousers. So there is no excuse why you cannot have a Battalion of these in your collection!

NAPBR03 Round hat Flank coy

Following on from the initial releases, will be British infantry in bicornes, giving another option for your growing army. Although designed for the Flanders Campaign, I think that these new figures will be useful in other settings. The troops sent to the Caribbean at this time would have been similarly equipped and I guess that they will be suitable for service in Ireland. To be fair, my knowledge of uniforms in this early period of the Napoleonic wars is still lacking, so don’t take my word for it!

NAPBR05 Highland command

However, I have just finished reading the first part of Wellingtons biography by Rory Muir ( an excellent if somewhat lengthy read). I was intrigued to find out as early as 1793, Britain had planned to invade France in support of the Vendee insurgency with a force under the Command of Lord Moira. The landing never took place due to a heavy defeat of the rebels but the possibility of ‘What if’ scenarios would make an interesting game. Sharp Practice would provide an ideal set of rules! Wellington was present in the Flanders campaign. He was Lieutenant-Colonel of the 33rd Foot. His first action was at the Battle of Boxtel where although not involved in the initial attack, his regiment successfully covered the First Guards withdrawal, repulsing a French attack ‘throwing a few cool and well directed volleys into the enemy’s squadrons, obliging him to decamp’. So I guess that I have an excuse to get my first battalion of Victorious Miniatures!

Boxca01 Chinese Dragon cannon

I digress! Back to Victorious miniatures ranges. Also available are some very nice Chinese cannon for the Boxer Rebellion, the next period in which Keith intends to build his range. I am very much looking forward to more of this period becoming available. That said, if I can use these for the earlier Taiping Rebellion of 1850, I will be able to scratch another wargaming itch and my special edition Flashman figure will find a use on the gaming table!

The Victorious Miniatures range is now available to purchase from both Keiths own web site here:

VICTORIOUS MINIATURES

or, from the Arcane Web store here:

Arcane Scenery/Victorious Miniatures

Please take a look at these new models and of course, if they appeal, your support will be most welcome. If you are not ready to purchase, a ‘like’ click on the Victorious Miniatures facebook page will at least help cheer Victorious Miniatures on!

Victorious Miniatures Facebook page

Keith will need all the help that he can get in building his range. I know that he has some great ideas for future releases and of course all of us here at Arcane scenery wish him the very best of luck with his new venture.

Geisha Spy

I’m still very much enthused by the Test of Honour Game and my only regret at the moment is that I’m not getting enough game time in! However, I still have my Napoleonic project lumbering away and having just finished 18 British Lifeguards with another 6 about to hit the paint board, I fancied painting something different. I remembered that I had yet to paint the limited edition Geisha Spy that was released with the bundle, so I thought I would spend a few nights painting her.

Geisha

I had already done some research on Geishas wearing Kimonos (not the most unpleasant of tasks…) and collected some pictures onto my Pinterest board here:

SAMURAI PINTEREST BOARD

I tend to think about projects in advance and often will put together a reference board way in advance of actually painting the subjects. If you check out the rest of my boards you will guess what my next Napoleonic theme will be if I ever finish my British! I digress, the pictures are very inspiring but way beyond my painting capability. So having given the overall colour scheme some thought, I went with a similar scheme that worked well on my unarmoured samurai. They came as a pair so I thought that I would keep to the same pallet. The picture below sort of captured the look and colour scheme that I was after.

So one evening was spent cleaning up the model, assembling it, filling the gaps that seem to appear around the joins on the hand and priming in a neutral grey, my preferred primer colour. The initial colour blocking was quite straight forward. The model is beautifully cast and molded so it was a very straight forward task to paint. I used all Vallejo Colours. The main kimono was painted in Sand Yellow 70916, the trim, Sky Blue 70961, the Kimono sash, Dark Prussian Blue 70899, Hair, Black 70950 and skin tone was done using Light flesh 70928. I did think about using white for the face but many of the pictures show Geishas with a pale flesh rather than the full white make up and I preferred this. The fan was painted in green…for the time being…

Geisha with first colours blocked on

To add shadows and depth to the kimono, I gave it a wash of thinned down army painter dark tone ink. This helps me to see where the folds in the cloth lie and hence where the shadows would be. I then repainted the Kimono with the sand yellow, leaving some of the darker shadows. I then added some white to the original colour to add some highlights to the top of the folds. I also used a very fine brush to add some dark lines to the deep folds and creases and the borders of the sky blue trim. I used a skin wash to add some shadow to the face but this was watered down until it was practically clear. It just added enough shadow to the face and neck.

Black lining and details to hair ornaments etc added.

I then painted in the eyes – I’m not good at these! The next step was to thin down the black lining and shadows by over painting and to add a bit more detail to the hair ornaments. I also added some highlights to the sky blue Kimono and the sash. The sash was easier to do than I thought. I first dry brushed it to show where the detail was and then carefully painted on the ‘stripes’ in a lighter blue.

Face & eyes done. More highlights added to the trim.

I use the photographs as a way of reviewing my work. It allows me to see the model and pick up on any obvious errors. In the next picture, you can see that I had missed painting part of her sleeve – I couldn’t see this in ‘real life’!

spot the missing paint!

Despite constantly picking up errors and correcting them, there was still something very wrong with the figure. It some how wasn’t working. I asked Rob, a colleague at work what he thought the problem was. It was obvious, the fan was the wrong colour! The green just wasn’t working. We had an interesting discussion on colour theory but the upshot was that I had introduced too many colours onto the model. I over painted the fan in light blue and it instantly looked better.

a new fan!

Once again, using my pinterest boards as a reference, I painted a simple cherry blossom design onto the fan and added a few further highlights to the kimono. I also added her finger nails in Ivory 70918 and touched up any more obvious mistakes.

Nearly there!

The final stage was to add some pink and white to the cherry blossom to the design on the fan and to re base the geisha on a plain MDF base that I had painted to match the Sarissa shrine that I had previously completed. My Geisha Spy was ready for the table!

Geisha spy at the shrine.

The geisha was a most enjoyable model to paint and certainly stretched my painting skills. It made a pleasant change from painting Napoleonic units! Although close up, there are still a few errors and the paint job isn’t as smooth as I would like, she looks great at a distance and is a nice addition to my collection!

If you would like to join the fun with the Test of Honour game we have a full range available in our shop here:

SAMURAI RANGE

All the paints used are also available from our Vallejo range here:

VALLEJO MODEL COLOUR

Incidentally, if you are looking for a specific colour, rather than browse through all the 200+ colours listed, just put the number into the search bar. So sky blue is 70961:

Search result

Finally, at the time of writing, all products, except aerosols, are post free to most world wide locations! I hope that you enjoy your modelling!

Test Of Honour New Scenario – Battle Report

The club that I normally attend is having a bit of a summer break. It seems that everybody is busy at the same time this year. So rather than go to the club, I hosted a game in my newly tidied games room AKA the garage, with Andy Callan as my opponent. When Andy organises a game at his place, he usually comes up with a well thought out scenario, usually based on an actual historical battle, so I thought that I better put some preparation into our game. The plan was to play Test of Honour and as we have fought our way through the scenarios in the book, it was time to think of something new.

As it was, I went for a variant of the Spy scenario, so not too original, but it did present some extra challenges and once again, this simple game provided a very enjoyable evenings play. The scenario was as follows. A samurai and four retainers were defending a shrine from marauding war bands. This small band of fighters were unsure as to where their allegiance lay and could be persuaded to join one of the warbands and fight on their side to protect their property. All a player had to do to recruit the defending warriors to his band would be for the Hero Samurai to persuade them that they were the force for good!

Do You want to be in my gang? I’ll give you this head…..

The Set up was quite simple. The ‘neutral defending’ Samurai and his warriors were set up on a mid line, in cover, exactly between the two players forces who were allowed to deploy anywhere along their base lines up to 6 inches into the table. The cards and tokens for the ND force were placed to one side of the table. Apart from blocking line of sight, they would not be part of the game unless ‘recruited’ by one side or the other. This process was quite simple. To recruit a neutral warrior, the hero samurai from either side would have to make base contact with the warrior. On the next activation, he would then take a test of wits. If passed, the warrior would be successfully recruited to his warband and the neutral warriors card and token would be moved to the successful warriors side of the table. On the next turn, the token (or tokens, in the case of the samurai) would be placed in the bag and he would be activated as normal and fight for his new master.

The neutral warriors were deliberately spaced across the table to allow both attacking warbands the chance of recruiting extra men. Obviously, the prize was the neutral Samurai. However, the game would only be won if one of the hero Samurai were slain or one of the opposing forces were driven back to their side of the table and the shrine secured. We set the turn time for 6 moves but if there was no clear outcome, we were happy to keep going. As it was 6 turns was enough! We were using 21 points for each opposing warband.

Archer for hire.

So how did it play out? To start with, both of the hero Samurai charged towards the shrine in an attempt to recruit the neutral Samurai. However, once it became clear that I was going to win that race, Andy decided to draw back and concentrate on moving up his war band in support of his Samurai. I had chosen bowmen as my ‘fire support’. Andy was using musketmen. I was dubious as to how effective that musketmen would be in groups – I was about to find out! I quickly persuaded the neutral Samurai to join my band and leaving him and the wise Samurai to defend the temple, the Hero moved off to attempt to recruit more reinforcements.

Wise Samurai and his new best friend under fire!

This turned out to be a big mistake! My two samurai were now unsupported as Andy’s warband closed the gap on them. To make matters worse, my warband was lagging behind as I used any activations to allow my bowmen to shoot rather than moving up troops. My archers were somewhat ineffective as they were shooting at long range. The opposite was the case for Andy’s musket troops. When used in a group of three, they benefit from having four dice to hit, and then four dice to kill, all at 20 inches. So musket fire combined with Andy’s Samurai both charging in meant that I lost my newly recruited Samurai and my wise Samurai in one blood thirsty turn!

Are you sure you are a wise Samurai? It’s feeling a bit lonely out here!

My hero Samurai had managed to recruit an extra bowman but this was small consolation. In my rush to gain recruits I had split my warband and my Hero Samurai out of position and isolated. Even worse, Andy’s musket men were now working extremely well as a team, one group firing, the other reloading and causing damage with every shot.

Newly recriuted Samurai faces the opposing hero.

Newly recruited Samurai faces the opposing hero samurai, his new best friend having already been dispatched!

My archers continued to be ineffective even as the range closed. Despite their best attempts to keep Andy’s Samurai at bay, they closed in on my hero.

Archers fire!

With his spearmen drawing my archers fire, my own Hero under musket fire, his Hero and wise Samurai closed for the kill and cut down my hero Samurai to win the game. The moral of the story being never listen to a man who wants to be your friend if he is holding someone else’s head….

Once again, Test of Honour had delivered an excellent evenings entertainment and this apparently straight forward rules set has enough depth to keep you coming back for more. Maybe I need some more musket men….

Incidentally, once we had finished that game we moved onto a game using mounted Samurai. I know from the feedback on facebook there is a feeling that these are over pointed in the current rules. I certainly feel that this is the case, so we made some minor changes to their rules. First up, we allow charge at 9 inch range – it seems daft not to. We allow a 6 inch move and fire for mounted archers. We also allow an extra dice for avoid when targeted by missile fire. It all worked very well but to be fair, we both had mounted Samurai. It will be interesting to try these amendments when one player has a warband on foot only and see if the game is still balanced.

If you haven’t had a go with Test of Honour and would like to try it, we have all the sets currently available as well as the superb Sarissa scenery in my shop here:

SAMURAI

1 … 16 17 18 19 20 … 42

At the time of writing, the items are available post free to most worldwide locations.

Subscribe to our newsletter!

Help