Footsore Irish Slingers – Done!

The recent spell of hot weather hasn’t helped with my painting or modelling projects. Apart from the paint drying as fast as I could use it, it’s been too hot in my garage to sit with the lights on whilst painting for any length of time. Far better to sit in the garden with a nice cool drink! Despite that, I have completed the unit of Irish Slingers for my new Saga army, albeit with a bit of a rush to have them ready for this blog. I have finished these guys in some fairly earthy, drab colours and have not worried too much about any decoration or embellishments. I concluded that if all you had on the battlefield was a sling or in the case of some of these boys, a rock to throw, then they weren’t too far up the social ladder ( if even on it) and therefore their clothing would be pretty basic.

Irish Slingers ready for action

Irish Slingers ready for action

I used the Army Painter strong tone ink to get the shading and then highlighted using the original colour with some off white added. As for basing, I used the Sarissa 25mm round MDF bases. I have a general rule that I use MDF bases for Metal figures and plastic bases for plastic figures. There’s no real reason, Renedra plastic bases would be fine, it’s just a personal preference. Once I had glued the figures to the base, I used my new favourite thing to blend the figures to the bases – Vallejo dark earth textured paste. The next job was to paint the base and texture paste with a Chocolate brown and then highlight by adding Iraqi Sand to bring out the texture. Once dry ( which didn’t take long… see my comments above!) I used some watered down PVA to coat the centre of the bases around the figures and dunked them into my green scatter mix. The final task was to add some grass tufts. I decided to ‘road test’ the new range of Javis tufts the we have just started to stock.

The Irish like a bit of cover!

The Irish like a bit of cover!

I decided on the Autumn mix 6mm tufts, which are not too bright a green and blend well with my scatter base. My first thought was that they were a bit too big to use straight form the pack and so I cut one in half. However, on the next figure I used the whole tuft and decided that this gave a good effect. After all, the Irish in Saga like to operate near to cover! To brighten up some of the bases, I added some of the Flower mix 10mm tufts. I did cut these down and unusually for me used them sparingly on just four of the figures. Overall, I am quite happy with the effect and pleased to recommend these new tufts. So my first unit is ready for the table!

Get ready for action! He's rolling dice again!

Get ready for action! He’s rolling dice again!

So it’s onto the next unit. This time I’m going to have a go at the Footsore Irish Fianna with Dane axes. These warriors will hopefully cause mayhem as part of my Saga band and count as Hearth Guard, so eight of these will form a good part of my army. As the photo below shows, once the figures have been cleaned up, I attach them to a board using blutack and spray prime them. In this case I am still using Leather Brown. Blu tacking them to the board enables me to hold them at all angles to ensure that they are well primed. Next step is to put them on temporary bases, again using blutack and to get painting!

Fianna, Primed.

Fianna, Primed.

As well as working on the unit of Slingers, I have been ‘pimping’ a Sarrisa dark age A frame hut as the first piece of scenery for my Saga games. I have made some more progress but not quite finished it. With hindsight I should have made this as a step by step blog article in it’s own right. Here is the progress so far:

Sarissa A frame hut W.I.P.

Sarissa A frame hut W.I.P.

As you can see from the photo, I have highlighted the thatched roof by dry brushing it with Vallejo Desert Yellow first and then again by adding off white to the desert yellow. I’ve added some Vallejo Dark earth paste to the edges of the house to give it a rougher texture. Finally, I’ve base coated the timber that will show with chocolate brown. The next picture shows this a bit better.

timber base coated

timber base coated

As you can see, the paint does not cover the laser etching, allowing this detail to shine through. I will be doing a bit more work on this and I will show you progress in the next blog.

I am at the Wargames Illustrated Saga ‘Iron Man’ day this weekend. I have low expectations as to how well I will perform in a tournament. I don’t really like Tournament wargaming, I’m not comfortable in taking the hobby too seriously and worry that I might…. However, The Wargames Illustrated days have in the past managed to create a nice relaxed atmosphere and I hope that I will learn a great deal and meet some like minded people from the world of wargaming. Read all about it in the next Blog!

An Irish Saga

My output continues to be slow and steady but this week I have made a start on my new Saga Warband, the Irish. I am using the Footsore figures that are available from my shop as I really like the sculpting and the poses of the figures. Even better, Footsore have a ready made 4 point Irish War Band that will form the core of my army. That said, I have decided to add in some Irish Slingers and some other extras so that I can field at least 6 points, possibly more. I have also decided to make some scenery specifically for my Saga games. The ideal outcome of all this will be that I have a Saga ‘kit’ of a couple of boxes containing my army, rules & dice and the scenery that I need to play a game. Well that’s the plan! With this in mind, I have started to ‘pimp up’ some Sarissa Dark Age buildings, well one at the moment. So here is my progress so far. Last week, I showed that I have primed and prepared the Irish Slingers ready for painting. I had also painted the flesh using Vallejo dark flesh. Rather than use my usual method of block painting and quick shade, I thought that I would try a variation and use ink and highlighting to see if I could get a slightly better finish. Unlike my Napoleonic figures, I wanted each figure to look more individual.

Irish Slingers from Footsore primed with leather brown and Flesh added

Irish Slingers from Footsore primed with leather brown and Flesh added

Having spent so long painting Napoleonic troops where every figure pretty much has the same uniform, I find it quite difficult to paint a batch of figures where they all are clothed differently. I have been tempted to paint them one at a time but this will be an even slower job for me and will waste paint, as I inevitably squeeze far too much out on my pallet! The solution for me is to use a limited range of colours and vary them across the figures. As you can see from the next picture, I have chosen a batch of earthy and drab colours and this is how the figures look once they have been block painted and washed with strong tone Army painter ink.

Irish slingers block painted & ink washed. Colours used in the background.

Irish slingers block painted & ink washed. Colours used in the background.

The next stage is to repaint the colours, leaving the shadows created by the ink and to create highlights by adding a bit of either off white or Iraqi sand to the original colour. I also used normal flat flesh to highlight the skin.

Figures repainted & highlighted

Figures repainted & highlighted

The lighting makes it all look a bit harsh. I hope that this picture shows them in a better light!

Irish Slingers in cover

Irish Slingers in cover

As you can see these are not properly based yet. I will finish the next six figures and then base the whole group in one go so that they look similar. It is also a chance to correct any obvious errors – the camera is good for spotting these as you can see…. Whilst they wont win any painting competitions, I’m sure that they will be ready for the table soon.

In between painting the Slingers, I have been attempting to add some detail to the sarissa Dark Ages A frame hut. I thought that I would add some teddy bear fur roofing as a start.

teddy bear fur roofing being glued in place.

teddy bear fur roofing being glued in place.

The first job was to cut the fur to shape using kitchen scissors ( don’t tell the wife!) and then to stick it into place using PVA glue. The clamps are just holding it whilst the glue dries.

Roof coated in glue & primed

Roof coated in glue & primed

The next stage was to coat the teddybear fur in watered down PVA glue, wait for it to dry ( two days!) and then I have sprayed it with Army Painter brown primer ready for a coat of paint. I’m not sure whether to paint the roof grey as this is the actual colour that thatch goes as it weathers or a light brown or straw colour as this is the colour that seems to be used more by modellers. I’ll show you progress in my next post.

Finally, with all of this dark age stuff on the work bench, I did finally find the time to order my flags for the Cornwall regiment that I finished some months ago. The flags are from GMB, my favourite flag supplier and they certainly improve the regiment. Here are the command stands.

32nd Cornwall Regiment now with flags!

32nd Cornwall Regiment now with flags!

1 2